RODE NT2000 Large-Diaphragm Multipattern Condenser Microphone

Combining a true condenser capsule, continuously variable polar pattern control, and ultralow-noise circuitry, the Rode NT2000 large-diaphragm studio microphone offers pro-level sonic performance along with extremely versatile pickup responses, making it ideal for capturing all sorts of voice and instrument sources, and for experimenting with the balance of direct and room sound. Plus, it includes a vibration-inhibiting shockmount and a hard shell carry case, so it is truly studio- and travel-ready.

With low noise being a top priority of the NT2000, its 1" gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Enhancing its professional character are the onboard pad (variable from 0 to -10 dB) and high-pass filter (variable from 20 to 150 Hz) settings, which help avoid distortion and bass buildup. Since it can run on 24 or 48 VDC phantom power, the NT2000 can be used with a variety of professional and entry-level XLR mic preamps.


Large-Diaphragm True CondenserThis true condenser (externally biased) features a 1" gold-sputtered, dual-diaphragm capsule that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.Variable Polar PatternThe NT2000's polar pattern is continuously variable from omnidirectional to cardioid to figure-8. As a result, the NT2000 offers excellent versatility for single-source close miking, dual-source pickup, room ambience capture, and more.Variable PadThe pad, which reduces the input level to the microphone's in-built preamp, can be continuously adjusted from 0 to -10 dB. This is very useful when recording loud sound sources (such as close miking of drums or amplifiers) to avoid overloading the microphone's preamplifier.Variable High-Pass FilterChoose any setting between 20 and 150 Hz to cut the level of the selected frequency and below by 3 dB. This control is useful for selecting the cut-off point for potentially offending low frequencies such as traffic noise and floor vibrations. It can also be used on vocals to achieve a limited response for a "different" sound.Transformerless OutputThe transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.48V Phantom PowerThe NT2000 operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.Shockmount and CaseThe NT2000's accessory package includes a studio-grade shockmount that reduces stand-borne vibration and a hard shell carry case.Features at a Glance

• True condenser (externally biased)
• Large 1" HF1 capsule with gold-sputtered dual diaphragms
• Polar pattern is continuously variable between omnidirectional, cardioid, and figure-8
• Continuously variable pad and high-pass filter
• Self-noise of only 7 dBA
• Transformerless JFET active circuitry
• Wide dynamic range
• XLR 3-pin output connector
• Runs on phantom power
• High-strength welded and heat-treated steel mesh head
• Internally shock-mounted capsule
• Includes SM2 shockmount and hard shell carry case