Microphone Wireless SENNHEISER EW 112P G4

 

A broadcast quality sound solution. Providing the highest flexibility for your video sound and field recording applications.

A robust wireless microphone system that offers excellent sound quality, simple mounting and ease of use.

Rugged all-in-one wireless system with high flexibility for broadcast quality sound, including the clip-on microphone ME 2-II (omni-directional) or ME 4 (cardioid) for excellent speech intelligibility and daily on-location use.

 

 

Frequency range A1: 470 - 516 MHz 

A: 516 - 558 MHz 

AS: 520 - 558 MHz 

GB: 606 - 648 MHz 

G: 566 - 608 MHz 

B: 626 - 668 MHz 

C: 734 - 776 MHz 

D: 780 - 822 MHz 

E: 823 - 865 MHz 

JB: 806 - 810 MHz 

K+: 925 - 937,5 MHz 

Dimensions Approx. 82 x 64 x 24 mm 

Compander Sennheiser HDX 

THD, total harmonic distortion ≤ 0.9 % 

Weight (incl. batteries) approx. 160 g 

Audio output 3.5 mm jack socket: +12 dBu (mono, unbalanced) 

Signal-to-noise ratio ≥ 110 dBA 

Switching bandwidth up to 42 MHz 

Peak deviation ±48 kHz 

Nominal deviation ±24 kHz 

Operating time Typically 8 h 

Modulation Wideband FM 

Power supply 2 AA batteries, 1.5 V or BA 2015 accupack 

Current consumption at nominal voltage: typ. 180 mA 

with receiver switched off: ≤ 25 µA 

Adjacent channel rejection ≥ 65 dB 

Intermodulation attenuation ≥ 65 dB 

Powering 3 V battery / 2.4 V rechargeable battery 

Receiving frequency Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels 

RF sensitivity < 1.6 μV for 52 dBA eff S/N 

Squelch low: 5 dBµV middle: 15 dBµV high: 25 dBμV 

Temperature Range -10 °C to +55 °C 

Receiver Principle Adaptive diversity 

Blocking ≥ 70 dB 

 

 

Dimensions Approx. 82 x 64 x 24 mm 

Compander Sennheiser HDX 

THD, total harmonic distortion ≤ 0.9 % 

Weight (incl. batteries) approx. 160 g 

Signal-to-noise ratio ≥ 110 dBA 

RF output power Max. 30 mW 

Switching bandwidth up to 42 MHz 

Peak deviation ±48 kHz 

Nominal deviation ±24 kHz 

Operating time Typically 8 h 

Modulation Wideband FM 

Power supply 2 AA batteries, 1.5 V or BA 2015 accupack 

Current consumption at nominal voltage: typ. 180 mA 

with transmitter switched off: ≤ 25 µA 

Input impedance 40 kΩ, unbalanced / 1 MΩ 

Max. Input voltage 3 Veff 

Powering 3 V battery / 2.4 V rechargeable battery 

Transmission frequency Max. 1680 transmitting frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels 

AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz 

Temperature Range -10 °C to +55 °C 

Frequency stability ≤ ±15 ppm 

 

Connector 3.5 mm jack 

Frequency response 50 to 18,000 Hz (ME 2-II) 

Max. sound pressure level 130 dB 

Cable length approx. 1.60 m 

Transducer principle pre-polarized condensor microphone 

Pick-up pattern omni-directional 

Sensitivity in free field, no load (1kHz) 20 mV/Pa 

Equivalent noise level 36 dB